01
Drinking water
Treatment solutions designed to improve the characteristics of water intended for consumption or specific uses that require a high level of quality.
View solution ↗Industrial water treatment
We design water purification and treatment solutions using technologies tailored to the characteristics of the water, the contaminants present and the objectives of each industrial process.
Solutions for different water treatment needs
Treatment is defined based on the source of the water, its composition, the final application and the requirements it must meet after the process.
02
Industrial water purification
Treatment of water used in industrial processes through solutions tailored to the contaminants and specifications of each application.
View solution ↗
03
Wastewater treatment
Solutions to improve wastewater quality and reduce specific compounds before discharge, reuse or further treatment.
View solution ↗Every water stream presents a different challenge
The technology and treatment medium must be selected according to the composition of the water and the parameters that need to be controlled.
Organic compounds
Treatment of specific organic substances present in water through adsorption processes.
Odour and taste
Improvement of organoleptic properties when compounds responsible for odours or tastes are present.
Colour
Reduction of specific compounds that may influence the colour of the water.
Micropollutants
Solutions designed to retain specific contaminants present at low concentrations.
Residual compounds
Polishing stages designed to improve final water quality after other treatment processes.
Process water quality
Adaptation of water quality to the specific requirements of particular industrial processes.
Activated carbon selected for each application
Performance does not depend solely on using activated carbon. Material selection, system sizing and operating conditions determine the system’s actual performance.
BIONATUR
H₂O
Adsorption
01
Type of activated carbon
We select the properties of the adsorbent medium according to the treatment objective.
02
Contact time
The system must be sized to provide adequate contact conditions.
03
Treatment flow rate
The flow rate determines the size and configuration of the treatment equipment.
04
Media replacement
Operation includes monitoring and replacement of the material when it reaches its useful capacity.
From water analysis to the treatment system
Each project is designed using real data. We analyse the composition, define the objective and size the solution for operation.
Characterisation
We assess the source of the water and the parameters that determine its treatment requirements.
Objective
We define the characteristics the water must achieve after treatment.
Technology selection
We select the most suitable adsorbent medium, configuration and technology for the application.
Sizing
We calculate the operating conditions, capacity and required system size.
Operation
We define the monitoring and maintenance required to sustain installation performance.
Tell us what water you need to treat. We design the solution.
Send us the water characteristics, flow rate, the parameters you need to reduce and the objective of the process. Our team will assess the most suitable treatment configuration.